Level up your new Peaty’s Monarch grips with these Chris King coloured replacement lock rings. Mix and match with five Monarch grip colours to fully customise your ride.The replacement Monarch grip lock rings are available in twelve anodised colour options, are made specifically from 6061 aluminium and come with preinstalled 3mm stainless steel allen keys bolts. Torque bolts to a maximum of 3Nm. Check the full fitting instructions below before riding.WHAT’S INCLUDEDTwo lock rings with 3mm allen key bolts.Slimline 8mm wide clamp to maximise grip area.6061 aluminium lock rings with stainless steel bolts.Available in twelve colour options.Left and right markings on each clamp.Cardboard backing board and securely held in place with paper locking wire.FITTING INSTRUCTIONSLoosen 3mm allen key on lockring.Remove Monarch grips from bars and pull off old lock rings.Re-fit new clamps, ensuring the correct side is fitted to the specifically correct grip using the L & R markings engraved above the allen key.When fitted correctly, the flat edge of the lockring should touch the rubber of the grip and allen key facing the rider.Re-fit grips, following our grip application steps.Ride!For more Peaty’s products, including tubeless repair, sealant and grips. Check out the brand page below: SHOP PEATY'S
