Everyone knows that a straight line is the fastest line! That’s why the Peaty’s Holeshot CO2 Tyre Inflator Head is made straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle.It’s as small and lightweight as possible. So it’s easy to carry in your pocket, bag or strapped to your bike.Made from CNC’d 6061 aluminium and with a patent pending valve design. The finer details of Peaty’s inflator heads have been specifically agonised on. From the exact rubber compound of the o-rings to the awesome Chris King anodised colours.KEY FEATURES:Available in 12x Chris King colours.Unique Patent Pending compact straight line design for maximum airflow.Simply push down to inflate.Contains 1x inflator head (CO2 cartridges and freeze protector sleeve sold separately).Presta valve compatible.INSTRUCTIONS:At first, remove the valve cap and loosen the valve core. Check the valve is clear by pressing down the loose valve core. Generally you should hear air flowing through the valve.Cover the CO2 cartridge with the closed-base freeze protector sleeve (CO2 and sleeve are sold separately).Screw the CO2 cartridge fully into the inflator head. After that you may hear a small hiss when the cartridge is successfully pierced. If not, give the valve a quick press and you should hear gas ‘tsssst’ out.Press the head over the valve and push straight down firmly to discharge the cartridge and inflate the tyre to your specifically desired pressure. Releasing the inflator head will stop the flow.Once the tyre is inflated, remove the inflator, re-tighten the valve core and re-apply the valve cap.Ride!For more Peaty’s products including tubeless sealant, tyre repair and valves. Check out the brand page here: SHOP PEATY'S
